Requirements

  gnuBox for Nokia 3230
  Internet connection (I was using AOL Dial-In for this tutorial)
  A Bluetooth dongle with WIDCOMM Bluetooth Software
  Analog X Proxy
  mRouter Software v2 or v3

If you own other Symbian based Smartphones, you can use the installed mRouter. With Sony Ericsson you just need to double click on this icon (My P900) . If you own an A9250/A920 you can launch the Desktop suite.

If you don’t have these softwares installed, you can download for free, the mRouter 3 from the Intuwave website.

Step by step installation: Step1

On the Nokia 3230:
  Install gnuBox_3230.sis
  Launch gnuBox
  Some configuration text will be displayed:

  Chose Debug -> Dump Full CommsDB and wait till the confirmation dialog box appears (about 10 seconds)
  Option->Exit (don’t do an Application Switching)
  Now we are going to add an Access Point (Settings->Connection->Access Points->Options->New access point->Use default settings).

Fill the configuration with these settings:

Once done: Go to Options->Advanced settings and enter these settings:

We are going to take the default port number used by the AnalogX Software. Of course if you are using another HTTP Proxy Software, change this value to your port number

Step 2

On the PC:
  Launch the mRouter (either by clicking these icons :) You should see this icon in the tray bar:
  Check that the Bluetooth COMs shown in the mRouter Properties (right click on tray Icon->Properties) are corresponding to the Bluetooth Serial Port COMs from the Bluetooth Software.

  Before trying to init the serial connection, be sure the devices are paired.

Step 3

On the Nokia Phone:

Now it’s time to configure the Nokia Phone in order to connect to our mRouter and proxy through Bluetooth:
  Launch gnuBox
  Options -> Install -> Create Records

  Options->Exit
  Relaunch gnuBox
  Options->2box Bluetooth->Serial Port

- You will be asked to choose a Bluetooth Device.

• This message dialog appears: “Do you want to require encryption?”
• Confirm with OK

  Go to the Web application
  Choose an Internet URL
  You will be asked to connect
  A message box “Connecting to BT” will shortly appear
  On PC side the Bluetooth icon will turn to green
  Congratulations: now you can surf with your Nokia 3230 !

On the PC:

You will notice that the mRouter icon is moving and turning into a squared wave, when you are surfing with your Nokia 3230 .

Questions and answers

Q: The Bluetooth Tray Icon is green, but on the phone there’s a dialog box showing Connecting via Bt’. The dialog box doesn’t disappear. Why?
A: This means that you haven’t launched the mRouter software on PC side. The phone is continuously searching the access point with the ip address 169.254.1.68. You should now launch the mRouter software. Once you did it, don’t forget to launch your HTTP Proxy.

Q: I’m getting a “Web connection time out” although I have correctly launched mRouter. What could be wrong?
A: If you have launched the mRouter, your phone has established the Bluetooth connection. To retrieve HTTP packets or to surf, we need a proxy. We set the proxy (in Phone’s Connection Settings) on port 6588 (used by AnalogX Proxy). To solve the problem, you just need to launch your HTTP Proxy (in our case AnalogX Proxy).

Q: Nothing is working / I succeeded in letting gnuBox work, but now nothing is working and I receive a message “Already in use”
A: You can try to close your Web application and to reconnect. If you still have problems, try to exit gnuBox and to close the current connection manually (Connectivity->Connection Manager->Bt).

If really nothing is working, you can try the third solution: restart your phone (although it shouldn’t help a lot, perhaps just to re-init the Bluetooth phone’s services) and delete the Bt access point. Then follow the Step to step instructions to reload the CommDB.

Comments

This document will be soon available in French and German Thanks to Xan for having created the gnuBox