| EIpsec_NotANATTPacket | -5154 | UDP packet is NOT a NAT Taversal packet |
| EIpsec_NoInnerSource | -5155 | Cannot find inner-src for outbound packet when tunneling (for SECPOL) |
| EIpsec_LostSA | -5156 | An SA has been lost betweenApply andVerify, expired? (for SECPOL) |
| EIpsec_IcmpError | -5157 | An ICMP error report containing AH orESP (for INET6) |
| EIpsec_PolicyUnknownSelector | -5158 | unknown selector keyword |
| EIpsec_PolicyInboundOutbound | -5159 | Only one of the ’inbound’ or ’outbound’ is allowed |
| EIpsec_PolicyIpMaskExpected | -5160 | Expected IP address (as mask) here |
| EIpsec_PolicyIpAddressExpected | -5161 | Expected IP address here |
| EIpsec_PolicyInvalidIpAddress | -5162 | Invalid IP address |
| EIpsec_PolicyRightParen | -5163 | Right parenthesis expected |
| EIpsec_PolicyLeftParen | -5164 | Left parenthesis expected |
| EIpsec_PolicySpecNotFound | -5165 | SA specification is not defined before reference in selector |
| EIpsec_PolicySyntaxError | -5166 | Generic delimiter error inspecification |
| EIpsec_PolicySpecName | -5167 | SA specification name missing or invalid |
| EIpsec_PolicyNoEncryptAlgorithm | -5168 | ESP specification must include encryptionb algorithm |
| EIpsec_PolicyNoAuthAlgorithm | -5169 | AH specification must include authentication algorithm |
| EIpsec_PolicyTooManyTypes | -5170 | Type can be specified onlyonce for specification |
| EIpsec_PolicyNoType | -5171 | SA type (AH or ESP) omittedfromspecification |
| EIpsec_PolicyCloseBraceExpected | -5172 | closing brace expected |
| EIpsec_PolicyNumberExpected | -5173 | number value expected |
| EIpsec_PolicyUnknownSpec | -5174 | unknown policy specification keyword |
| EIpsec_PolicyInvalidIdentity | -5175 | invalid identity syntax |
| EIpsec_PolicyIdentityDefined | -5176 | identify already defined |
| EIpsec_PolicyUnknownAuth | -5177 | algorithm not defined in algorithm map |
| EIpsec_PolicyUnknownEncrypt | -5178 | algorithm not defined in algorithm map |
| EIpsec_UnavailableDigest | -5179 | No installed library implements the digest |
| EIpsec_UnavailableCipher | -5180 | No installed library implements the cipher |
| EIpsec_UnknownDigestNumber | -5181 | Attempting to use algorithmnumber that is not known |
| EIpsec_UnknownCipherNumber | -5182 | Attempting to use algorithmnumber that is not known |
| EIpsec_BadCipherKey | -5183 | Key in SA is too short (forthe algorithm) or is weak |
| EIpsec_MismatchDestinationIdentity | -5184 | destination identity does not match |
| EIpsec_MismatchSourceIdentity | -5185 | source identity does not match |
| EIpsec_MismatchProtocol | -5186 | protocol does not match |
| EIpsec_MismatchDestinationPort | -5187 | destination port does not match |
| EIpsec_MismatchSourcePort | -5188 | source port does not match |
| EIpsec_MismatchProxy | -5189 | proxy address does not match |
| EIpsec_MismatchSource | -5190 | source address does not match |
| EIpsec_MismatchReplayWindow | -5191 | ReplayWindow length is shorter than required |
| EIpsec_MismatchedEncryptAlg | -5192 | Encrypt algorithm doesn’t match |
| EIpsec_MismatchedAuthAlg | -5193 | Auth algorithm doesn’t match |
| EIpsec_MismatchedPFS | -5194 | PFS bit is not same |
| EIpsec_MismatchedType | -5195 | SA Type (AH/ESP) does not match |
| EIpsec_MismatchedDestination | -5196 | SA destination does not match (internal error?) |
| EIpsec_AcquireFailed | -5197 | Acquiring SA failed (no SAavailableor negotiated) |
| EIpsec_EspBadCipherBlockSize | -5198 | Configuration error, cipherblock size must be < 256 |
| EIpsec_EspSequenceWrap | -5199 | Outbound sequence # wrappedaround for this SA |
| EIpsec_AhSequenceWrap | -5200 | Outbound sequence # wrappedaround for this SA |
| EIpsec_AhPacketTooLong | -5201 | Outbound packet would exeed2**16-1 with AH |
| EIpsec_AhRMBufSplit | -5202 | Inbound AH processing failed (Memory?) |
| EIpsec_NoBundle | -5203 | Incoming packet had transforms, but policy doesn’t require any |
| EIpsec_TooManyTransforms | -5204 | Incoming packet had more transforms than policy requires |
| EIpsec_UnrequiredSA | -5205 | Applied SA where policy hasnone |
| EIpsec_MismatchedSA | -5206 | Applied SA does not match the policy |
| EIpsec_TunnelMismatch | -5207 | Tunnelmode does not match the policy |
| EIpsec_TooFewTransforms | -5208 | Incoming packet has less transforms than policy requires |
| EIpsec_MaxTransforms | -5209 | Incoming packet exceed configured maxlimit of transforms |
| EIpsec_NoSelectorMatch | -5210 | None of the policy selectors matched |
| EIpsec_OutboundPending | -5211 | Outbooud SA does not exits,ACQUIRE pending |
| EIpsec_OutboundNotFound | -5212 | Outbound SA does not exist,ACQUIRE started |
| EIpsec_ReplayDuplicate | -5213 | Duplicate packet (replay window test) |
| EIpsec_EspPadLength | -5214 | The ESP pad length is corrupt (probably wrong key) |
| EIpsec_EspPadByte | -5215 | The ESP pad byte content isinvalid (probably wrong key) |
| EIpsec_DataAlignment | -5216 | Data not aligned by block size |
| EIpsec_PacketLength | -5217 | Invalid lenght of the packet |
| EIpsec_AhAuthentication | -5218 | Authentication check failedin AH |
| EIpsec_AhIcvLength | -5219 | ICV length in packet does not match algorithm |
| EIpsec_AhInboundSA | -5220 | The inbound SA for AH doesnot exist |
| EIpsec_AhAuthAlg | -5221 | Required auth algorithm forAH not available/installed |
| EIpsec_EspEncrAlg | -5222 | Required encrypt algorithmfor ESP not available/installed |
| EIpsec_EspAuthAlg | -5223 | Required auth algorithm forESP not available/installed |
| EIpsec_EspAuthentication | -5224 | Authentication check failedin ESP |
| EIpsec_EspInboundSA | -5225 | The inbound SA for ESP doesnot exist |
| EIpsec_CorruptPacketOut | -5226 | Corrupt packet after IPSECoperations |
| EIpsec_CorruptPacketIn | -5227 | Truncated or corrupt packetor header(in) |
| EIpsec_RMBUF | -5228 | RMBUF operation failed unexpectedly |
| Windows Mobile | J2ME | 下载中心 | 游戏策划 | 招聘与求职 | 购书指南 | 视频教程